Media Pointe DVP Manual de usuario descargar pdf (Pagina 17)

DVP | 9

DB-9 Female Function DB-9 Female

2 Rx to Tx 3

3 Tx to Rx 2

5 Signal Ground 5

Command Line

NavigatetotheCommandLinemenupagetosetthe

command line interface that can be accessed from

TelnetorRS-232.Alistofthesecommands

Telnet(TCP/IP)

The Telnet port by default is disabled. To turn on Telnet

control,settheTelnetportnumber(typicallyPort23)

andchecktheTCP/IPportenablecheckbox.Apassword

for the Telnet session can be enabled by entering a

passwordinthePasswordforTCP/IPconnectiontext

box. If a password is not desired on the Telnet session,

leave the text box blank.

To access the telnet client, open a command prompt on

your computer and enter: telnet <ipaddress>

OnceconnectedtotheDVP,aconnectmessagewillbe

displayed.

 DVPWelcometoMediaPOINTE

 Password:_

Onceloggedin,type‘help’or‘?’foralistof

commands. You can also see below for a list of the

available commands.

RS-232

OnthebackoftheDVPtherearetwoserialcontrol

portsconguredasaDTEthatsupportstheRS-232

protocol. A Null-Modem cable should be used between

theDVPandtheCOMportonyourPC.

TerminalsessionsettingsrequiredforRS-232control

are:9600,8,None,1withNoFlowControl.

There is no password protection on this interface

and,bydefaulttheRS-232portisenabled.The

administrator has the ability to disable the port by un-

checking the COM port enable checkbox.

SMTP Mail

TheDVPhastheabilitytosendemailmessagestoa

remote SMTP server. Enter the address of the SMTP

server in the appropriate text box (use the IP address

ifDNSsettingsarenotset).TheEmaileldwillsetthe

default“From”eldtotheenteredemail.Leavethis

eldblanktoallowtheusertoentertheirown“From”

emailaddress.ConrmanychangestotheSMTPmail

congurationbyclickingSaveSMTPsettingsbutton.

Notications

TheDVPcanbeconguredbytheAdministratortosend

emaileventnoticationsfromtheNoticationssection

of the main menu.

• First, navigate to the SMTP Mail menu page to enable

SMTPmailandllinthemailserverandmailauthor

information(ifnotalreadyset)thenconrmthese

settings with the Save SMTP settings button.

•Next,navigatetotheNoticationmenupageand

entertheemailaddresstowhichthenoticationswill

besentandselecttheeventstotrack.Conrmthese

settingswiththeSaveNoticationSettingsbutton.

Logging

TheDVPcanbeconguredbytheAdministratortolog

eventsfromtheLoggingsectionofthemainmenu.

Selecttheeventsyouwishtosavetoalogandconrm

thesesettingswiththeSaveLoggingOptionsbutton.

LOGS (Notication menu page)

Log name Description

Event Log The time and date of all media play of live streams or

archived content are captured in this log

Failed Logins All failed logins attempts are logged and date stamped

SMTP Log All e-mails sent from DVP are logged and date

stamped

Currentlogswillhold14daysofdata.Logslistedas

“old”willincludetheprevious14daysofdata.

bye quit cli

displayratio help ?

ipassign ipset key

log netstat notify

ntp play playstatus

reboot resetconf shutdown

smtp status sysinfo

test usersec volume

1 2 ... 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Media Pointe DVP Manual de usuario Pagina 17

Comentarios a estos manuales