Media Pointe DVP Manual de usuario descargar pdf (Pagina 14)

6 | DVP User Manual 4.0 August 2009

Static IP Address

TosetaFixed(Static)IPaddress,followtheprocedure

below.

1.ConnecttheEthernet/LANcableandpowerupthe

DVP.

2. On your Internet browser, enter the current IP

addressoftheDVP.(Note:Iftheunithasfactory

settings,thedefaultstaticIPaddressis:192.168.1.253)

3.LogintotheDVPusingtheprocedureshowninthe

LoggingInsection.

4. Navigate to the network settings page by selecting IP

Settings.

5.InordertochangetoaFixedorStaticIPaddress,set

theDHCPClientcheckboxto“Disable”.FillintheIP

Address,IPSubnetMaskandDefaultGatewayelds.

Once you have completed all of the above steps, select

the Apply Changes button. You will receive a pop-up

window warning you to use this option with caution

as you are changing the default address and should

remember the new settings.

Note: The new IP settings will take place

immediately

DHCP IP Address

1.Followthesamestepsasabove(1thru4)

2.ToallowtheDVPtopickupanIPaddress,setthe

DHCPClientcheckboxto“Enable”.

3. If you have made any changes to the network

settings, select the Apply Changes button. You will

receive a pop-up window warning you that you to use

this option with caution as you are changing the default

address and should remember the new settings.

Conguring IP via USB

ThenetworkparametersoftheDVPcanbesetviaa

specialcongurationtextleonaUSBmemorystick.

InsertthememorystickintooneoftheDVPUSBports

at any time. The unit will look for the presence of this

congurationleandwillimplementthesettingsfrom

thele.UseasimpleASCIItexteditortocreatethe

le.

System Name

The factory set system name is the unit build number.

You can change the name in the IP setting menu page

byenteringanewnameinthetexteld.Arebootis

required for the new name to take effect. The name

canbeupto15characterslongandconsistofalpha-

numeric characters. No special characters or symbols

will be accepted except for a hyphen.

IP Settings

The System Name and all network settings can be set

in the IP Settings section of the main menu. Network

settingsmayalsobeconguredviaUSBmemorystick

conguration.

Toquicklyndthesystem’sIPAddress,connectaVGA

(RGBHV)orDVImonitortotheoutput.Usethekeypad

to navigate to the System Info page of the on screen

menu.

IPaddressesmaybeassignedtotheDVPbytwo

ways:DHCPandFixed(Static)IP.Ifyournetworkis

conguredforDHCP,theIPaddresswillbeprovided

automatically and will be visible on the video output of

theDVPonpowerup.

Network Conguration

Setting Description

DHCP Client Enable DHCP settings for automatic address retrieval f rom

DHCP Server. Disabling the DHCP client will require a static IP

address (with subnet mask and default gateway) to be entered.

IP Address Assign a static IP address to DVP. This eld will also display the

currently assigned IP address

IP Subnet

Mask

Assign subnet mask to DVP. This eld will also display the

currently assigned subnet mask

Default

gateway

Assign a default gateway to the DVP. This eld will also display

the currenty assigned default gateway

DNS server If the network supports DNS, enter the DNS Server Address(es))

here.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Media Pointe DVP Manual de usuario Pagina 14

Comentarios a estos manuales